AirLink MP70 Firmware Packages

Feb 05, 2024 - Author: Sierra Wireless - Version 4.17.1 - 56410 Views

This page contains AirLink MP70 ALEOS and radio module firmware images.

Please also see the ALEOS 4.17.1 Release Bulletin.

(Warning: Upgrading from ALEOS 4.15.x and earlier releases to 4.17.1 is not directly supported. AirLink MP70 routers must be upgraded to ALEOS 4.16.x (see MP70 Firmware List 4.16.2) before upgrading to ALEOS 4.17.1.)

MP70 ALEOS Firmware

MP70_ALEOS_4.17.1.005

Radio Module Firmware

MP70 LTE-A Pro

North America (EM7511)

Global (EM7565)

MP70

North America & EMEA (MC7455)

APAC (MC7430)

See also:

ALEOS MD5 Checksums

IMPORTANT NOTICE

Applicable to ALEOS 4.9.0 and later releases

As part of Sierra Wireless’s continued commitment to ensuring the highest level of security on all AirLink devices, the upgrade process for this release will detect the following potentially insecure device configurations and make corresponding configuration changes to mitigate the potential security impact:

If User has a default password: Access to Telnet/SSH and server-initiated MSCI over the cellular interface will be disabled. Users of these services are advised to set a strong, unique User password prior to upgrading.
If Sconsole has a default password: The account will be disabled until a password is set. Users of reverse telnet are advised to set a strong, unique Sconsole password before upgrading.
If DMZ is set to automatic and the device is not using Public IP (DMZ Enabled is set to Automatic and Host Connection Mode is not set to Ethernet Uses Public IP): DMZ will be disabled. Users of DMZ but not Public IP are advised to set DMZ Enabled to Manual before upgrading.

If a device has already been upgraded these services can be re-enabled using ACEmanager or AirLink Management Service (ALMS).

In addition to the above changes, the viewer account has been removed and will no longer be accessible in this release.