Telemetry: Driving Behavior

Telemetry: Driving Behavior

The Driving Behavior report categorizes various telemetry-based, driving behavior safety parameters (e.g. long idles, hard accelerations, excessive speeding, etc.) and summarizes them across a range of vehicles over a period of time. This report is best used with multiple vehicles.

This report displays information, warnings, and errors for driving behavior including:

• A vehicle’s maximum and average speeds, which makes it easy to identify good and poor driving behaviors.
• The amount of time a vehicle spent above the limits .
• RPM, quick acceleration and hard braking data is provided in the number of occurrences.

Note:

• This report is supported on MG and ALEOS devices.
• Accelerator information will only be available with ALEOS 4.9.0 running on MP70. This information is only be used when AMM is possession of this information. If AMM does not see this information available within the requested report interval, it will default to use vehicle speed data.

Notes:

• Black text: normal
• Orange text: below average
• Red text: considerably below average
• Green text: best result
• Grey text: very low run time
• Drive Time: the cumulative time that the vehicle was moving

Basic Configuration Fields

• Gateway(s)^*: by default this is set to the gateway(s) selected in the gateway tree. Enter the name(s) manually to modify this field. Click on Filter to open the subfilter options.
• Report time range^*: use the drop-down menu to select from Previous Months, Previous Weeks, Previous Days or Range. Enter the numeric value in the field. When Range is selected, use the calendar pop-up to select the dates. Alternatively, enter the date and time manually (yyyy/mm/dd hh:mm).
• Speed warning^*: the speed to be considered the limit over which a warning state will be displayed. The default is 70 (mph).
• Speed error^*: the speed to be considered the limit above which an error state will be displayed. The default is 80 (mph).
• Acceleration warning^*: the acceleration speed (mph/second) for which a warning state will be displayed. The default is 5.
• Deceleration warning^*: the deceleration speed (mph/second) for which a warning state will be displayed. The default is -5. This value implies hard braking.
• Acceleration / Deceleration (only supported on MP70 and MP70E running ALEOS 4.9.0+): when selected, the accelerator data from the gateway is used as the basis for acceleration and deceleration events in the report (e.g. hard acceleration and braking).
• RPM warning^*: the RPM value for which a warning state will be displayed. The default is 3500. This value implies high engine revolutions and can contribute to issues such as poor fuel economy.
• RPM error^*: the RPM value for which a warning state will be displayed. The default is 6000.
• Allowed Idle Time: the time (in seconds) within which idling is not counted as part of the idling time. The default is 120 seconds.
• Output Format: select HTML to generate the report in the browser window. Select Excel to display the generated report in Microsoft Excel. Note that the Excel option only works for reports which produce data in a table format.

^*denotes a required field

Advanced Configuration Fields

• Medium Stop: the time (in minutes) after which a “medium stop” should be reported for a stopped vehicle.
• Long Stop: the time (in minutes) after which a “long stop” should be reported for a stopped vehicle.