Tracker: Gateway Trip Trend

The Trip Trend report shows the distance that one or more gateways travelled for each trip taken over the specified time period. The report also shows the average speed, maximum speed, total distance travelled, total travel time, and total distance travelled for each specified time period (e.g. per day, per hour etc.). Distances are calculated from GPS data (as opposed to odometer data).

Note: The Trip Trend report is supported for ALEOS devices in AMM 2.16 and above.

Basic Configuration Fields

• Gateway(s)^*: by default this is set to the gateway(s) selected in the gateway tree. Enter the name(s) manually to modify this field. Click on Filter to open the subfilter options.
• Vehicle Type: specifies the type of vehicles to include in the report. Clicking this field displays the Select a vehicle type popup allowing for All vehicle types or a specific vehicle type to be selected.
• Report time range^*: use the drop-down menu to select from Previous Months, Previous Weeks, Previous Days or Range. Enter the numeric value in the field. When Range is selected, use the calendar pop-up to select the dates. Alternatively, enter the date and time manually (yyyy/mm/dd hh:mm).
• Limit to map area^*: select Not Limited to include data from any geographic location. Select Manually defined area to create a temporary zone for the analysis – only data from inside this zone will be included in the report. Select One or more zones to limit the analysis to one or more predefined zones (see the AMM Operation and Configuration guide for more information about zones).
• Exclusion Zones: allows the report to exclude data from one or more predefined zones (see the AMM Operation and Configuration guide for more information about zones). Leave this option checked (default setting) to include data from any geographic location. Uncheck this option to specify zones to exclude data from.
• Output Format: select HTML to generate the report in the browser window. Select Excel to display the generated report in Microsoft Excel.
• Save for later or schedule a run time: Enable to create reports that can be saved for future use. See Saving and Scheduling a Report for a Later Run Time for more information.

Advanced Configuration Fields

• Split graph results by: specifies the time period for which the distances travelled should be calculated and shown below the graph. By default, distance is calculated for each day of the report’s time range.

^*denotes a required field