AirLink GX450 Firmware Packages

Apr 25, 2018 - Author: Sierra Wireless - Version 4.9.3.002 - 128406 Views

This page contains the AirLink GX450 Update packages.


Note: If you are updating an AirLink GX450 gateway from an older version of ALEOS (4.4.x), first update the gateway to ALEOS 4.5.1 and then update to 4.9.3.


ALEOS_Software_4.5.1.009


IMPORTANT NOTICE
Applicable to ALEOS 4.9.0 and later releases

As part of Sierra Wireless’s continued commitment to ensuring the highest level of security on all AirLink devices, the upgrade process for this release will detect the following potentially insecure device configurations and make corresponding configuration changes to mitigate the potential security impact:
  • If User has a default password: Access to Telnet/SSH and server-initiated MSCI over the cellular interface will be disabled. Users of these services are advised to set a strong, unique User password prior to upgrading. 
  • If Sconsole has a default password: The account will be disabled until a password is set. Users of reverse telnet are advised to set a strong, unique Sconsole password before upgrading. 
  • If DMZ is set to automatic and the device is not using Public IP (DMZ Enabled is set to Automatic and Host Connection Mode is not set to Ethernet Uses Public IP): DMZ will be disabled. Users of DMZ but not Public IP are advised to set DMZ Enabled to Manual before upgrading. 
If a device has already been upgraded these services can be re-enabled using ACEmanager or AirLink Management Service (ALMS).

In addition to the above changes, the viewer account has been removed and will no longer be accessible in this release.



North America


-GX450_ALEOS_4.9.3.002


Radio Modules:



International


-GX450_ALEOS_4.9.3.002


Radio Modules:


-GX450 Radio Module Firmware for Generic Operators Europe
©2018 Sierra Wireless. All rights reserved.
×
You have been successfully unsubscribed to this product. To access your subscription click here.