AirPrime - Dual SIM without using the SIM Detect Pin Application Note

May 11, 2017 - Author: Sierra Wireless - Version 1.0 - 2156 Views
This application note describes how to design a Dual SIM solution without using the SIM detection pin of the module.

Download

Comment

Tags

AirPrimeEM7305EM7330EM7355HL7518HL7528HL7538HL7539HL7548HL7549HL7588MC7304MC7330MC7350MC7354SL8080SL8080BTSL8080TSL8081SL8082SL8082BTSL8082TSL8083SL8084SL8084BTSL8084TSL8090SL8092

Related items

AirPrime - HL Series - Dual SIM Single Standby Application Note
This application note describes the Dual SIM Single Standby feature of the AirPrime HL Series of embedded modules.
AirPrime - HL6528x - Dual SIM Dual Standby Application Note
This application note describes the Dual SIM Dual Standby feature of the HL6528x embedded module.
AirPrime EM73xx/MC73xx AT Command Reference
This document describes proprietary, password-protected AT commands available for Sierra Wireless AirPrime® EM 9x15-based intelligent embedded modules. These commands are intended for use by OEMs, and are supplemental to the standard AT commands for GSM devices defined by the 3GPP (3rd Generation Partnership Project) in TS 27.007 AT command set for User Equipment (UE) and TS 27.005 Use of Data Terminal Equipment—Data Circuit terminating Equipment (DTE-DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (BSE).
AirPrime - HL7518 and HL7548 - AT Commands Interface Guide

This document describes the AT command set used with the AirPrime HL7518 and HL7548 embedded modules.

AirPrime - HL7528 - AT Commands Interface Guide

This document describes the AT command set used with the AirPrime HL7528 embedded module.

AirPrime - HL7538 - AT Commands Interface Guide

This document describes the AT command set used with the AirPrime HL7538 embedded module.

AirPrime - HL7539 - AT Commands Interface Guide

This document describes the AT command set used with the AirPrime HL7539 embedded module.

AirPrime - HL7549 - AT Commands Interface Guide

This document describes the AT command set used with the AirPrime HL7549 embedded module.

AirPrime - HL7588 - AT Commands Interface Guide

This document describes the AT command set used with the AirPrime HL7588 embedded module.

AT Commands Interface Guide for Firmware 7.54.0.A1
This document provides full description of AT commands supported by AirPrime wireless modules and AirLink Programmable Gateways.
©2024 All rights reserved
×
Subscribe Subscribed
You have been successfully unsubscribed to this product. To access your subscription click here.