This document describes methods (excluding FOTA) for upgrading HL78 Series firmware images.

This document describes methods for upgrading HL78 Series firmware.

This application note describes the Dual SIM Single Standby feature of the AirPrime HL Series of embedded modules.

The MangOH Red board does not come with a standard DB9 serial port like some of the other development boards and so the purpose of this document is to describe the necessary circuitry to interface a USB-to-Serial/RS-232 adapter/cable to the MangOH Red’s Raspberry Pi UART interface. The necessary components are widely available, and this interface will work with either the AirPrime HL and WP Series embedded modules.

This application note describes the antenna detection feature of the AirPrime HL Series of embedded modules.

This document provides a hardware reference design for HL6528 and HL6528-G, interfacing to a generic 3.3V host CPU or microcontroller.

This application note provides all necessary information to perform Firmware Over-The-Air (FOTA) on Sierra Wireless AirPrime HL Series modules. This application note applies to all products in the AirPrime HL6, HL7, and HL8 Series.

This application note provides a schematic diagram example of a PCM codec for the AirPrime HL6 and HL8 series of embedded modules.