Windows application used to download files to Sierra Wireless embedded modules.

This application note gives important information for securing WP Series modules to prepare for deployment.

This document describes Customer Secure Boot for Linux images, an extension of the Secure Boot functionality that Sierra Wireless WP series modules automatically provide for firmware images, which ensures only authenticated images are loaded and run on WP modules. This application note applies to all products in the AirPrime WP76 and WP77 Series.

This package contains a simple app to open a TCP socket and connect it to a local UART, and a technical note that describes the app.

This document describes guidelines for choosing or designing a GNSS antenna system for use with a Sierra Wireless AirPrime WP Series module. This application note applies to all products in the AirPrime WPx5, WP76 and WP77 Series.

The MangOH Red board does not come with a standard DB9 serial port like some of the other development boards and so the purpose of this document is to describe the necessary circuitry to interface a USB-to-Serial/RS-232 adapter/cable to the MangOH Red’s Raspberry Pi UART interface. The necessary components are widely available, and this interface will work with either the AirPrime HL and WP Series embedded modules.

This document describes the Secure Debug feature that is enabled on Secure Boot-enabled devices.

This document describes the antenna diagnosis feature of the AirPrime WP module.

This application note provides all necessary information to perform Firmware Over-The-Air (FOTA) and Software Over-The-Air (SOTA) on Sierra Wireless AirPrime WP Series modules. This application note applies to all products in the AirPrime WP8 and WP7 Series.

AirPrime WP modules flash firmware guidelines.

AirPrime WP modules guide to migrate to UBIFS.

WP module performances using Wi-Fi Reference Design with Legato & mangOH