Searching...

Matching results

    Default status report and data consumption

    Here follows the list of the parameters requested as part of default status report. This status report is automatically created upon system first connection to AirVantage and scheduled at every system heartbeat. This frequency is configurable from the Monitor activity.

    It also provides the average data consumption of the heartbeat and the default status report.

    Default Status Report

    The parameters in the following list are included in the default status report:

    Wireless service

    • RSSI
    • ECIO
    • RSRP
    • RSRQ
    • SIGNAL_BARS
    • NETWORK_SERVICE_TYPE
    • CURRENT OPERATOR

    Data usage

    • PERSISTED_BYTES_SENT
    • PERSISTED_BYTES_RECEIVED
    • PACKETS_SENT
    • PACKETS_RECEIVED

    Location

    • LATITUDE
    • LONGITUDE

    System level information

    • CURRENT_IP_ADDRESS
    • BOARD_TEMP
    • RADIO_MODULE_TEMP
    • NUMBER_OF_RESETS
    • POWER_INPUT_VOLTAGE
    • APN
    • CELL_ID
    • SID
    • NID
    • PN_OFFSET

    Data Consumption

    LinALEOS (ES, GX, LS, LX, MP and RV families) using HTTP via MSCI

    Average data transfer per heartbeat is 1,4 kBytes

    • upload: 936 bytes per heartbeat
    • download: 504 bytes per heartbeat

    Average data transfer per heartbeat + default status report is 3,11 kBytes

    • upload: 1,987 bytes per heartbeat
    • download: 1,027 bytes per heartbeat

    LinALEOS (ES, GX, LS, LX, MP and RV families) using HTTPS via MSCI

    Average data transfer per heartbeat is 5,8 kBytes

    • upload: 1,649 bytes per heartbeat
    • download: 4,281 bytes per heartbeat

    Average data transfer per heartbeat + default status report is 11 kBytes

    • upload: 3,270 bytes per heartbeat
    • download: 8,030 bytes per heartbeat

    LinALEOS Devices (ALEOS 4.6.x+) via LWM2M

    Average data transfer per heartbeat is ~900 bytes

    • upload: 512 bytes per heartbeat
    • download: 382 bytes per heartbeat

    Average data transfer per heartbeat + default status report is ~2 kBytes

    • upload: 1,174 bytes per heartbeat
    • download: 799 bytes per heartbeat

    All data transferred between an AirLink device and ALMS using the LWM2M protocol is secured.

    TOP