If your firewall is configured to limit inbound traffic, you have to enable the following IP addresses in your firewall configuration:
The protocols and ports that shall also be enabled are:
Moreover, if AirLink gateways in server-initiated mode are to be supported, enable the following ports:
If you are using a stateful firewall, the above configuration is sufficient. On the other hand, if you are using a stateless firewall, you must also allow response from ALMS or AirVantage servers as follows:
Or, in case of server-initiated gateways, response from gateways to the ALMS server:
The following settings apply to legacy PinPoint X, PinPoint XT, MP (ALEOS), Raven X,and Raven XE gateways running ALEOS 4.0.x.
If your firewall is configured to limit inbound traffic, enable the following IP address in your firewall configuration:
If legacy AirLink gateways in server-initiated mode are to be supported, enable the following port:
If your devices do not rely on public DNS, you have to add the following hostnames in your private DNS:
For legacy PinPoint X, PinPoint XT, MP (ALEOS), Raven X,and Raven XE gateways running ALEOS 4.0.x., you may need to use the following hostnames in your private DNS: