AMM 2.16.1 and above includes support for GNX devices.
Stats Reported by GNX Devices
Stats Reported by GNX Devices
The following subsections lists the stats reported to the AMM by GNX devices.
GPS
- GPS Altitude
- GPS AntennaStatus
- GPX FixDimension
- GPS Location-heading
- GPS Location-latitude
- GPS Location-longitude
- GPS Location-miles
- GPS Location-speedmph
- GPS Location-zone
- GPS Satellites
- GPS Satellites In Use
- GPXFix
Telemetry
- Accelerator Pedal (ThrottlePos - col 177)
- Accelerator Pedal Low Idle Switch (col 211)
- Accelerator Pedal Kickdown Switch (col 212)
- Average Fuel Economy
- Battery (jBattery - col 107)
- BrakeSwitch (BrakePedalPos - col 184)
- DiagnosticTroubleCode (event 47)
- EngineCoolantTemp (CoolantTemp - col 74)
- Engine Oil Temp (OilTemp - col 104)
- EngineRPM (EngineSpeed - col 77)
- FuelLevelInput (FuelLevel1 - col 99, FuelLevel2 - col 100)
- OBDIdleTime (EngIdleHours - col 113)
- OBDScannerConnected (Bus Status - col 56)
- Odometer (BusOdometer - col 70)
- MotionState (State - col 31)
- Parking Brake Switch (ParkBrakeSW - col 181)
- TimeAtIdle (Event 16)
- Total Engine Hours (EngTotalHours - col 112)
- Total Fuel Used (FuelConsumed - col 89)
- Turbo Oil Temp
- VehicleSpeed (VehicleSpeed - col 75)
- VIN (Event 109)
Gateway
- Accelerometer-Acceleration-incident
- Accelerometer-Acceleration-start
- Accelerometer-Acceleration-peak
- Accelerometer-Acceleration-counter
- Accelerometer-Acceleration-average
- Accelerometer-Deceleration-average
- Accelerometer-Deceleration-counter
- Accelerometer-Deceleration-incident
- Accelerometer-Deceleration-peak
- Accelerometer-Deceleration-start
- Accelerometer-Cornering-average
- Accelerometer-Cornering-counter
- Accelerometer-Cornering-incident
- Accelerometer-Cornering-peak
- Accelerometer-Cornering-start
- BrakePressure
- CellLink-ICCID
- CellLink-RSSI
- DriverID
- FuelLevel2
- GnxInternalTemp
- Ignition
- INPUT-ttyS1
- JBattery
- OUTPUT-ttyS1
- MainBattery
- MotionState
- OfflineTime
- OperationalState
- Platform
- PTOGovernor
- RemoteSocketAddress
- ReportIdleTime
- ScriptVersion
- SoftwareVersion
- TimeDifference
Notes:
- GNX uses certain values to initialize report parameters which are then used to create stats in AMM. These values are so-called impossible values and can be -95 degree C for any temperature stats, or 255% for percent type parameters. Any stats that have these impossible values should be discarded.
Reports Available for GNX Devices
Reports Available for GNX Devices
The following reports are supported for GNX devices by the AMM. For additional information about reports, see the AMM Reports Guide.
Telemetry
- Driving Behavior
- Vehicle Hours
Tracker
- Gateway Trips
- Trip Replay
- Zone Summary
- Zone Times
- Zone Map
- Zone Crossing Summary
Advanced
- Event Viewer
- Statistics Graph