Searching...

Matching results

    How to work with and create Odometer reports

    Odometer Report

    The Odometer report gives you the distance traveled for a vehicle during a specified period. You can view odometer readings for the start and the end of the reporting period, as well as the total distance traveled during the period. You also have the option of defining a zone for odometer reports, so that any travel within a zone can be included or excluded from the report.

    It also provides the:

    • total miles driven for each vehicle during the reporting period
    • vehicle’s odometer reading

    The reported odometer reading is derived from vehicle telemetry data. When configuring the router, ensure that you enter the starting Odometer Value, in meters, based on the current reading of your dashboard odometer. You can find this setting in ACEmanager and AirVantage under Services > Vehicle Telemetry > General. To enter starting Odometer Values from multiple vehicles, use Apply Settings (CSV). For more information, see How to change a setting on multiple devices .

    The columns displayed can be organized, resized and configured to show the parameters you want to see:

    Supported vehicles

    After testing, Sierra Wireless has found that the following vehicles are capable of reporting odometer data.

    Manufacturer & Model Model Year
    Dodge RAM pre-2018
    Dodge Charger pre-2018
    Chevrolet Equinox All (subject to further testing)
    Chevrolet Silverado All
    Ford Escape All
    Ford Explorer 2015-
    Ford F-150 Pre-2015
    Ford F-150 2015-
    Ford Taurus 2016-
    GMC Sierra All

    Creating an Odometer Report

    To begin, from the Reporting dashboard, click the Create a New Report icon.

    An empty report screen appears.

    Select a Template

    Choose how often you’d like this report to be run. Click:

    • Single for a one-time report

    • Daily

    • Weekly

    • Monthly

    • Annual

    Under Report Properties, you can complete the scheduling for your new report. The section below describes how to configure the time and the day on which you’d like your report to run.

    To run a report immediately, click Run Report.

    Define the Report Properties

    The required fields for creating a valid report are Type, Name and Range.

    Select the Report Type: Odometer

    The Type menu lists the available report types. The remaining report properties will vary according to the type of report you are defining.

    Enter a Name and Description

    Give your report a brief, descriptive name. You may want to use a driver’s name, a vehicle model, and/or the AirLink gateway or router model, depending on the type of report you run.

    Below the Name field, you can enter a longer report description. You may want to include the report’s schedule and reporting zone.

    Select the Reporting Range

    The Range menu lists the options for the reporting period. You can select a predefined Reporting Range, or configure a Custom range.

    If scheduling a recurring report, select one of the relative date ranges (Yesterday or Last 7 Days, for example). Selecting an absolute range will generate the same results each time.

    If you click Custom, a calendar appears, allowing you to select a start date/time and an end date/time for your report.

    Select Recipient Email Addresses

    Click the Recipient Emails field to select the people you would like to be notified when the report is run.

    You can also manually enter email addresses in this field.

    Configure Zones

    For Odometer reports, you can specify inclusion and exclusion zones.

    • Odometer data that is collected outside the “Include” zones is filtered out of the report results.

    • Odometer data that is collected inside the “Exclude” zones is filtered out of the report results.

    If the inclusion and exclusion zones overlap, the “Include” filter is applied first, followed by the “Exclude” filter.

    The zones available to you are defined in the Configure > Zones section.

    For more information, see How to Create a Zone .

    Select the Export File Formats

    Odometer reports can be exported as PDF or Excel (.csv) files.

    To select export file formats, click the appropriate buttons.

    Select Units

    You can choose to render your reports in metric or imperial units.

    Select the Systems

    Select the systems for which you want to run your new report. Select checkboxes for the desired systems, or filter the list to narrow down your choices. You do not need to use the checkboxes to select specific systems. Selecting the checkboxes will override general filters.

    Select Advanced Settings: Start and End Dates

    The Advanced settings are strictly optional. If you enable these settings, you may want to set a reminder (external to ALMS) to notify yourself of the start and end dates.

    Click the Advanced button to display options for selecting start and end dates for your reports. For example, you can configure a weekly report to run for two months starting one week from today.

    Clicking Start Time or Run Until displays a calendar on which you can define a start date/time and end date/time.

    TOP